BlogHotel.orgAccueil | Créer un blog | Imprimer la page Imprimer | Blog hasard Au hasard | Chercher des blogs Rechercher | Entrer dans le chat du blog Chat | | Jeux Jeux | Adminitration et édition du Blog Manager

filterproducts

4/3/2015 - How to Use Grease Filters

Firstly, locate the proper position for the grease trap. Usually, the best place is underneath the sink from which the Primary Filters, but you can place the trap anywhere you like so long as it is nearby and below the level of the grease's drain. In addition, you should use the top-right corner outlet of the grease trap to install a vent. Screw a 90-degree elbow onto the trap, direct it facing up and add a "T" fitting to the end, attaching the shaft of the "T" to the elbow, and leaving the crossing ends open to the air. This will ensure that air can flow in and out of the trap, allowing the grease to vent its moisture and solidify properly.

What's more, redirect the sink and/or drain pipes to connect to the Absolute Filter corner of the grease trap. Make sure that you use screw fittings with no hubs. You may need to add several elbow fittings and straight piping. And then redirect the open end of the sink/drain pipes to connect to the bottom right corner of the grease trap. You can use any combination of no-hub screw-in pipe fittings as before, but make sure that the level of the piping does not rise to a level above the exit from the grease trap.

Here got the last step of how to use Gas Turbine Prefilter. Install the clean-out tee in the grease trap's outlet. Open the lid on the grease trap, and insert the "X" end of the tee into the outlet. This will allow you to easily clear any grease clogs from the grease trap simply by turning and/or temporarily removing the clean-out tee.

During the progress of how to use Grease Filters, you need to clean out your grease trap at least once a month, perhaps even more depending upon how often you drain grease through it. Diligent maintenance of your trap will ensure that it does not fail at an inopportune time. Although some local traditions recommend burning HEPA Box as a means of disposal, this is not only dangerous but is also usually illegal by state and city ordinance laws. Contact your local waste disposal office for information on proper grease disposal. - See more at http://www.hefilter.com

Laisser un Commantaire! :: Envoyer à un ami!

A Propos

HEFIL has the most advanced computer-controlled automatic production lines for the production of mini-pleat panel air filters, separator air filters and cartridge filters, also is provided with the perfect testing process and the dust-free workshops.


Derniers Articles
Menu
Calendrier

Amis
    Liens


      Article 1 sur 8
      Précédent | Suivant

      Blog suivant >> Signaler un abus?Haut de page