Finally, set the specific China Female Header parameters of each icon. After editing the inspection program, users can create their own personalized 'Control Panels'. These panels are for workshop operators to use on the production line. The user can create these panels in a short period of time using the click combination method used when creating the inspection program described above.
The shape, position, logo and color of all components in a panel can be modified according to user preferences; multiple panels can also be created at the same time and linked together. The user can design the operation panel completely independently and add password protection to limit the workshop operator's ability to intervene in the inspection procedure. VPM usually runs in execution mode. The aforementioned control panel will be displayed and activated at this time, and the workshop operator will use the control panel through the integrated touch screen.
Through various buttons on the touch screen, the operator can start the visual inspection system, make the system run offline, load various inspection files and all other functions set by the system designer. The process of the stamping parts quality inspection system mentioned above can be given in the graphical programming language of VPM, as shown in Figure 9. Camera Tool-the entire inspection process starts with the camera tool,
Origin Tool-the origin tool determines the position of the part in the field of view, Template tools-template tool, Sub-pixel Line Gauge Tool Parallel Output Tool-if any inspection tool fails to detect, parallel output tool Send a 'stop' signal to the press. Camera Tool (Camera Tool) specifies that the entire inspection process starts with the camera. Origin Tool (Origin Tool) determines the position and angle of each pin in the camera's field of view, and provides this information to subsequent inspection tools.
|