BlogHotel.orgAccueil | Créer un blog | Imprimer la page Imprimer | Blog hasard Au hasard | Chercher des blogs Rechercher | Entrer dans le chat du blog Chat | | Jeux Jeux | Adminitration et édition du Blog Manager

Reliability is significantly reduced

When the rated working current is exceeded, the service life of the LED modeling lamp manufacturer will be affected. Nowadays, a small number of manufacturers with relatively high product quality requirements use the traditional epoxy resin 'pouring' method to seal LED modeling lamp manufacturers. When the external environment temperature rises, the internal resistance of the LED light source will decrease.

Market, and exported to Japan, Courtyard Decorative Light suppliers the European Union, Australia and other countries and regions. After the components are installed on the PCB and then tested, there are many problems and the analysis is quite difficult. This method is more troublesome to operate, and it will also be used for larger LED modeling lamp manufacturers. It should be noted that the increase in temperature will reduce the internal resistance of the led.. How many ma spectroscopy is used can only ensure the consistency of the color and brightness under the current. There is no obvious limit.

Reliability is significantly reduced. Usually, electronic devices are damaged by ESD. In recent years, experiments have confirmed that this potential damage will cause damage to electronic products after a certain period of time. LED modeling lamp manufacturers should adopt certain anti-static measures during the process of processing and production, such as: the workbench should be grounded, workers should wear anti-static clothing, wear anti-static rings, and wear anti-static gloves, etc.

The heat transfer methods include heat conduction, heat radiation, and heat convection. For high-power LED lighting fixtures, the heat conduction method plays a major role, so the thermal analysis of the led modeling lamp mainly considers the heat dissipation effect when the heat is transferred inside the led modeling lamp by heat conduction.

Posté le 11/11/2021 - 02:25 -
{ Commentaire 0 } Posté un Commentaire
Reverse connection of the zero live wire is a situation

Moreover, the LED modeling lights made by the sun board are not as simple as you think, because the sun board is divided into solid and hollow, and the color can be produced according to the needs of the building. Generally, the sun board can be used for 10 or 15 years. The sun board is produced from brand new imported materials to ensure the quality of the board. When both ends of the light are connected to the live wire at the same time, the light will not light up, nor will it light up or flicker.

The advent of sunshine board gives people convenience, and now sunshine board as a new type of environmentally friendly material is being widely used. The produced building can save you from worrying about the lighting effect. If the two ends of the lamp are connected to the neutral line at the same time, China Power Socket the following situations will occur. LED modeling lamp manufacturers avoid aging and yellowing. Based on these reasons, this paper selects the research of LED lamp modeling as the main research object of the thesis. The led modeling lamp of the led modeling lamp manufacturer is constructed by splicing and splicing sunshine panels as raw materials. One point worth mentioning later is that the led modeling lights made of sun panels are easy to clean, which reduces the cost of maintaining the led modeling lights.

There are also some lighting designs that give full play to the characteristics of LED light sources and creative lighting products. Reverse connection of the zero live wire is a situation, but a more important situation is caused by the structure of the circuit. Because the color of the board itself is already there, you can get an unimaginable effect as long as you use a white light to make the wick, which is both beautiful and generous.

There is only one live wire and one tempering wire in the wire tube like the switch part, and the light is on when the two are connected. The current passed through, this current is enough to stimulate the LED shape lamp beads to emit light. In recent years, environmental protection problems have been particularly serious.

Posté le 20/10/2021 - 05:29 -
{ Commentaire 0 } Posté un Commentaire

<<<  Précédent  [PAGE]  Suivant  >>>