BlogHotel.orgAccueil | Créer un blog | Imprimer la page Imprimer | Blog hasard Au hasard | Chercher des blogs Rechercher | Entrer dans le chat du blog Chat | | Jeux Jeux | Adminitration et édition du Blog Manager

wisepowder Accueil | Profil | Archives | Amis
wisepowder

Automatic Spring Coiling Machine1/11/2022
Automatic Spring Coiling Machine Crush Grinding: In this process, distance between the two grinding wheels is set to the required spring length. Springs are fed through the loading plate between the grinding wheels. As the desired length is attained, springs fall through a chute to the bottom from where they may be collected. The removal of extra material is possible by single pass as well as by multiple pass.Get more news about Electronically Controlled Spring Coiling Machine,you can vist our website! Down Feed Grinding: In this process, the top wheel has a down feed arrangement. After the springs are loaded and fed between the grinding wheels, the Down Feed cycle starts. As the cycle proceeds, grinding pressure on the wheels rises, which increases the current of the spindle motor till it reaches the preset upper limit. At this point, Down Feed stops and grinding continues in Spark Out. During Spark Out, current begins to drop gradually, down to the preset lower limit. Then Down Feed starts again. This cycle continues till the desired spring length is reached. The setting of cycle is done with the help of scale, dogs and electrical limit switches. The Down Feed and the loading plate drive are both infinitely variable to suit individual springs. Available in two different versions with different Grinding Cycles - Crush Grinding and Down Feed Grinding - Model SEG-1 and SEG-3 with Crush Grinding Cycle as the springs in these wire ranges can be easily ground with this process - Model SEG-12 with an option of Crush Grinding or Down Feed Grinding as with bigger wire size springs can be ground better with Down Feed cycle and it gives high production rate with minimum handling of the springs Advantages: - The Decoiler starts as and when the Coiling Machine required wire. As soon as sufficient wire in the form of Loop is available, the decoiling stops, only to start again as required. This intermittent operation is performed automatically with use of proximity switches and solid-state control panel. - In case the wire gets entangled or cannot be fed for any reason, the Decoiler and coiling machine motors cutoff automatically, preventing the wire from breaking.
Poster un Commentaire

Entry 863 of 2723
Précédent | Suivant

Blog suivant >> Signaler un abus?Haut de page